From 86af7ff53cc1a9121fef2a16f203a855a75e7c1b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Emin=20=C3=96zata?= Date: Wed, 15 Jul 2026 17:31:22 +0300 Subject: [PATCH] stash: add 'rename' subcommand MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is no way to change the message of a stash entry after the fact. The only option is dropping the entry and re-storing it by hand, which moves it to the top of the stash list and gets fiddly for deeper entries. Add 'git stash rename []', defaulting to the latest entry like the other subcommands do. It reads the object id and reflog message of the target entry and of the entries above it, drops them all like 'git stash drop' would, and stores them back in the same order, with the new message going to the target. Position, contents and the reflog chain stay as they were. The command checks every entry it is about to rewrite and refuses to start if one of them does not look like a stash commit, which can only happen when refs/stash was written to by hand. Finding that out halfway through the sequence would lose entries. Should a write-back fail anyway, the entry's object id is reported so it can be recovered with 'git stash store', and the command only reports success when the reflog ended up in the requested state. This was proposed before: in 2010, as a "git reflog update" command that edited reflog entries in place [1]. When it came up again in 2013 [2], Junio rejected it on the grounds that reflogs are append-only recovery logs, and that whoever really cares about a stash message can pop and re-stash [3]. Michael Haggerty pointed out in that thread that refs/stash does not fit the description: its reflog is the primary data store for stash entries, and 'git stash drop' rewrites it all the time [4]. So this patch stays away from the reflog machinery entirely and does the suggested pop-and-re-stash workaround mechanically, without the detour through the working tree. The sequence only works if entry positions hold still while it runs, so the command takes index-based selectors (stash@{1}) and rejects time-based ones. It also refreshes the reflog timestamps of the rewritten entries, and renaming stash@{n} costs n+1 reflog deletions and ref updates. [1] https://lore.kernel.org/git/20100620093142.GF24805@occam.hewgill.net/ [2] https://lore.kernel.org/git/loom.20130104T192132-16@post.gmane.org/ [3] https://lore.kernel.org/git/7vbod4tynt.fsf@alter.siamese.dyndns.org/ [4] https://lore.kernel.org/git/50ED2C78.1030300@alum.mit.edu/ Signed-off-by: Emin Özata --- Documentation/git-stash.adoc | 11 +- builtin/stash.c | 197 +++++++++++++++++++++++-- contrib/completion/git-completion.bash | 4 +- t/t3903-stash.sh | 79 ++++++++++ 4 files changed, 276 insertions(+), 15 deletions(-) diff --git a/Documentation/git-stash.adoc b/Documentation/git-stash.adoc index 50bb89f48362a4..03f2e03096be55 100644 --- a/Documentation/git-stash.adoc +++ b/Documentation/git-stash.adoc @@ -25,6 +25,7 @@ git stash create [] git stash store [(-m | --message) ] [-q | --quiet] git stash export (--print | --to-ref ) [...] git stash import +git stash rename [-q | --quiet] [] DESCRIPTION ----------- @@ -163,6 +164,12 @@ with no conflicts. created by `export`, and add them to the list of stashes. To replace the existing stashes, use `clear` first. +`rename [-q | --quiet] []`:: + Change the message of a single stash entry. The entry keeps its + position and its contents. __ must name an entry by + index (e.g. `stash@{1}`); renaming refreshes the reflog + timestamps of the entry and of the entries above it. + OPTIONS ------- `-a`:: @@ -258,7 +265,7 @@ literally (including newlines and quotes). `-q`:: `--quiet`:: This option is only valid for `apply`, `drop`, `pop`, `push`, - `save`, `store` commands. + `rename`, `save`, `store` commands. + Quiet, suppress feedback messages. @@ -292,7 +299,7 @@ For more details, see the 'pathspec' entry in linkgit:gitglossary[7]. __:: This option is only valid for `apply`, `branch`, `drop`, `pop`, - `show`, and `export` commands. + `show`, `export`, and `rename` commands. + A reference of the form `stash@{}`. When no __ is given, the latest stash is assumed (that is, `stash@{0}`). diff --git a/builtin/stash.c b/builtin/stash.c index c4809f299a313b..94e66d6074acdb 100644 --- a/builtin/stash.c +++ b/builtin/stash.c @@ -63,6 +63,8 @@ N_("git stash export (--print | --to-ref ) [...]") #define BUILTIN_STASH_IMPORT_USAGE \ N_("git stash import ") +#define BUILTIN_STASH_RENAME_USAGE \ + N_("git stash rename [-q | --quiet] []") #define BUILTIN_STASH_CLEAR_USAGE \ "git stash clear" @@ -80,6 +82,7 @@ static const char * const git_stash_usage[] = { BUILTIN_STASH_STORE_USAGE, BUILTIN_STASH_EXPORT_USAGE, BUILTIN_STASH_IMPORT_USAGE, + BUILTIN_STASH_RENAME_USAGE, NULL }; @@ -143,6 +146,11 @@ static const char * const git_stash_import_usage[] = { NULL }; +static const char * const git_stash_rename_usage[] = { + BUILTIN_STASH_RENAME_USAGE, + NULL +}; + static const char ref_stash[] = "refs/stash"; static struct strbuf stash_index_path = STRBUF_INIT; @@ -820,18 +828,12 @@ static int reflog_is_empty(const char *refname) refname, reject_reflog_ent, NULL); } -static int do_drop_stash(struct stash_info *info, int quiet) +static int drop_reflog_entry(const char *revision) { - if (!reflog_delete(info->revision.buf, - EXPIRE_REFLOGS_REWRITE | EXPIRE_REFLOGS_UPDATE_REF, - 0)) { - if (!quiet) - printf_ln(_("Dropped %s (%s)"), info->revision.buf, - oid_to_hex(&info->w_commit)); - } else { - return error(_("%s: Could not drop stash entry"), - info->revision.buf); - } + if (reflog_delete(revision, + EXPIRE_REFLOGS_REWRITE | EXPIRE_REFLOGS_UPDATE_REF, + 0)) + return error(_("%s: Could not drop stash entry"), revision); if (reflog_is_empty(ref_stash)) do_clear_stash(); @@ -839,6 +841,18 @@ static int do_drop_stash(struct stash_info *info, int quiet) return 0; } +static int do_drop_stash(struct stash_info *info, int quiet) +{ + if (drop_reflog_entry(info->revision.buf)) + return -1; + + if (!quiet) + printf_ln(_("Dropped %s (%s)"), info->revision.buf, + oid_to_hex(&info->w_commit)); + + return 0; +} + static int get_stash_info_assert(struct stash_info *info, int argc, const char **argv) { @@ -1190,6 +1204,166 @@ static int store_stash(int argc, const char **argv, const char *prefix, return ret; } +struct rename_entry { + struct object_id oid; + char *msg; +}; + +struct rename_data { + struct rename_entry *entries; + size_t nr, alloc; + size_t want; +}; + +static int collect_rename_entries(const char *refname UNUSED, + struct object_id *old_oid UNUSED, + struct object_id *new_oid, + const char *committer UNUSED, + timestamp_t timestamp UNUSED, + int tz UNUSED, const char *msg, + void *cb_data) +{ + struct rename_data *data = cb_data; + const char *eol = strchrnul(msg, '\n'); + + ALLOC_GROW(data->entries, data->nr + 1, data->alloc); + oidcpy(&data->entries[data->nr].oid, new_oid); + data->entries[data->nr].msg = xstrndup(msg, eol - msg); + data->nr++; + + return data->nr >= data->want; +} + +static int parse_stash_index(const char *revision, size_t *idx) +{ + const char *num = strstr(revision, "@{"); + char *end; + + if (!num || !isdigit(num[2])) + return -1; + *idx = strtoumax(num + 2, &end, 10); + if (*end != '}' || end[1]) + return -1; + + return 0; +} + +static int store_rename_entry(struct rename_entry *entry, const char *msg) +{ + if (!do_store_stash(&entry->oid, msg, 1)) + return 0; + warning(_("could not restore stash entry %s; " + "recover it with 'git stash store %s'"), + oid_to_hex(&entry->oid), oid_to_hex(&entry->oid)); + return -1; +} + +static int do_rename_stash(struct stash_info *info, size_t idx, + const char *msg, int quiet) +{ + struct rename_data data = { .want = idx + 1 }; + size_t i, missing = 0; + int ret = -1; + + refs_for_each_reflog_ent_reverse(get_main_ref_store(the_repository), + ref_stash, collect_rename_entries, + &data); + if (data.nr <= idx) { + error(_("%s does not exist"), info->revision.buf); + goto cleanup; + } + + if (!oideq(&info->w_commit, &data.entries[idx].oid)) { + error(_("%s changed concurrently; try again"), + info->revision.buf); + goto cleanup; + } + + /* refuse up front; do_store_stash() would die halfway through */ + for (i = 0; i < data.nr; i++) { + struct commit *stash = lookup_commit_reference(the_repository, + &data.entries[i].oid); + + if (!stash || check_stash_topology(the_repository, stash)) { + error(_("%s does not look like a stash commit"), + oid_to_hex(&data.entries[i].oid)); + goto cleanup; + } + } + + while (missing <= idx) { + if (drop_reflog_entry("stash@{0}")) + goto restore; + missing++; + } + + ret = 0; + while (missing) { + i = missing - 1; + if (store_rename_entry(&data.entries[i], + i == idx ? msg : data.entries[i].msg)) + ret = -1; + missing--; + } + + if (!ret && !quiet) + printf_ln(_("Renamed %s (%s)"), info->revision.buf, + oid_to_hex(&data.entries[idx].oid)); + goto cleanup; + +restore: + /* dropping failed midway; put the dropped entries back */ + while (missing) { + store_rename_entry(&data.entries[missing - 1], + data.entries[missing - 1].msg); + missing--; + } +cleanup: + for (i = 0; i < data.nr; i++) + free(data.entries[i].msg); + free(data.entries); + return ret; +} + +static int rename_stash(int argc, const char **argv, const char *prefix, + struct repository *repo UNUSED) +{ + int ret = -1; + int quiet = 0; + size_t idx; + struct stash_info info = STASH_INFO_INIT; + struct option options[] = { + OPT__QUIET(&quiet, N_("be quiet, only report errors")), + OPT_END() + }; + + argc = parse_options(argc, argv, prefix, options, + git_stash_rename_usage, 0); + + if (!argc) + usage_with_options(git_stash_rename_usage, options); + + if (!argv[0][strspn(argv[0], " \t\r\n")]) { + ret = error(_("stash message cannot be empty")); + goto cleanup; + } + + if (get_stash_info_assert(&info, argc - 1, argv + 1)) + goto cleanup; + + /* positions must stay stable across the drop-and-store sequence */ + if (parse_stash_index(info.revision.buf, &idx)) { + error(_("cannot rename '%s': name the entry by index, " + "like 'stash@{1}'"), info.revision.buf); + goto cleanup; + } + + ret = do_rename_stash(&info, idx, argv[0], quiet); +cleanup: + free_stash_info(&info); + return ret; +} + static void add_pathspecs(struct strvec *args, const struct pathspec *ps) { int i; @@ -2472,6 +2646,7 @@ int cmd_stash(int argc, OPT_SUBCOMMAND("push", &fn, push_stash_unassumed), OPT_SUBCOMMAND("export", &fn, export_stash), OPT_SUBCOMMAND("import", &fn, import_stash), + OPT_SUBCOMMAND("rename", &fn, rename_stash), OPT_SUBCOMMAND_F("save", &fn, save_stash, PARSE_OPT_NOCOMPLETE), OPT_END() }; diff --git a/contrib/completion/git-completion.bash b/contrib/completion/git-completion.bash index e8757877104eb9..08c53cea49010e 100644 --- a/contrib/completion/git-completion.bash +++ b/contrib/completion/git-completion.bash @@ -3465,7 +3465,7 @@ _git_sparse_checkout () _git_stash () { - local subcommands='push list show apply clear drop pop create branch import export' + local subcommands='push list show apply clear drop pop create branch import export rename' local subcommand="$(__git_find_on_cmdline "$subcommands save")" if [ -z "$subcommand" ]; then @@ -3508,7 +3508,7 @@ _git_stash () import,*) __git_complete_refs ;; - show,*|apply,*|drop,*|pop,*|export,*) + show,*|apply,*|drop,*|pop,*|export,*|rename,*) __gitcomp_nl "$(__git stash list \ | sed -n -e 's/:.*//p')" ;; diff --git a/t/t3903-stash.sh b/t/t3903-stash.sh index ecc35aae82a5fe..f175302c1a455e 100755 --- a/t/t3903-stash.sh +++ b/t/t3903-stash.sh @@ -1831,4 +1831,83 @@ test_expect_success 'stash show --include-untracked includes untracked files' ' test_grep "untracked" actual ' +test_expect_success 'rename a stash entry' ' + git stash clear && + >file-to-rename && + git add file-to-rename && + git stash push -m "original message" && + git stash rename "new message" stash@{0} >out && + test_grep "Renamed stash@{0}" out && + git stash list >list && + test_grep "stash@{0}: new message" list && + test_grep ! "original message" list +' + +test_expect_success 'rename defaults to the latest stash entry' ' + git stash rename "default target" >out && + test_grep "Renamed refs/stash@{0}" out && + git stash list >list && + test_grep "stash@{0}: default target" list +' + +test_expect_success 'rename a deeper stash entry keeps positions and states' ' + git stash clear && + for i in 1 2 3 + do + >file$i && + git add file$i && + git stash push -m "message $i" || return 1 + done && + git rev-parse stash@{0} stash@{1} stash@{2} >expect && + git stash rename "renamed middle" stash@{1} && + git rev-parse stash@{0} stash@{1} stash@{2} >actual && + test_cmp expect actual && + git stash list >list && + test_grep "stash@{0}: On.*message 3" list && + test_grep "stash@{1}: renamed middle" list && + test_grep "stash@{2}: On.*message 1" list +' + +test_expect_success 'rename the deepest stash entry' ' + git rev-parse stash@{0} stash@{1} stash@{2} >expect && + git stash rename "renamed deepest" stash@{2} && + git rev-parse stash@{0} stash@{1} stash@{2} >actual && + test_cmp expect actual && + git stash list >list && + test_grep "stash@{2}: renamed deepest" list +' + +test_expect_success 'rename accepts a bare index and honors --quiet' ' + git stash rename -q "quietly renamed" 1 >out && + test_must_be_empty out && + git stash list >list && + test_grep "stash@{1}: quietly renamed" list +' + +test_expect_success 'rename rejects bad arguments' ' + test_must_fail git stash rename "no such entry" stash@{99} && + test_must_fail git stash rename "" && + test_must_fail git stash rename " " && + test_must_fail git stash rename "not a stash" HEAD && + test_must_fail git stash rename "not an index" "stash@{now}" && + test_expect_code 129 git stash rename && + git stash list >list && + test_grep "stash@{1}: quietly renamed" list +' + +test_expect_success 'rename refuses to rewrite a non-stash reflog entry' ' + git stash clear && + >real-a && + git add real-a && + git stash push -m "real A" && + git update-ref -m junk --create-reflog refs/stash HEAD && + >real-b && + git add real-b && + git stash push -m "real B" && + git stash list >expect && + test_must_fail git stash rename "renamed A" stash@{2} && + git stash list >actual && + test_cmp expect actual +' + test_done